Posts Tagged ‘Tail Lights’

New Wiring Harness Circuits

Power Inputs to the Classic Technologies’ Relay/Fuse Panel The Classic Technologies Panel has four primary connections. A – 12V power input from the small fuse box (battery B+) to power the accessories circuits. A brown 12 AWG wire is used to the Yellow screw terminal spade lug connection. B – 12V power input from the […]


Exterior Lights

Headlamps Cars exported to the USA all had sealed beam headlights. Mounting and Adjusting Screws Four #10 – 32 x 1/2″ slotted cheese head screws with flat and shakeproof washers fasten the lamp assembly to the car’s body. The rubber seal is located between the body and the lamp bowl. Their location is shown in […]


Entry – 15 Boot Wiring, Tail Lights, Spare Tire & Headlamps

Wiring in The Boot

Wiring in the Boot The wiring enters the boot on both the LH and RH sides of the boot at the top of the rear wheel arches. The harness actually travels through the left and right hand sills and emerges at the base of the rear door sills through a large rubber grommet. Wires then […]